Klipring External

tax-term-featured-image

Available Sizes: 0.156" to 2.00"

Standard Material: Carbon Spring Steel

Standard Finish: Phosphate

drawing
PART NUMBER RETAINING RING SHAFT RETAINING RING GROOVE EDGE MARGIN Z min APPROX WT. LB / 1000 PCS.
DIAMETERS THICKNESS FREE DIAMETER WIDTH DEPTH
Frac. inch Dec. inch mm t       inches Tol. inches D     inches Tol. inches C C  1 b nom G     inches Tol. inches W   inches Tol. inches d ref
5304-15 5/32 .156 4.0 .035 .110 see fig.1 .39 .042 .120 ±.004 .039 .018 .036 .42
5304-18 3/16 .188 4.8 .035 .140 .400 .42 .048 .148 ±.005 .039 .020 .040 .63
5304-25 1/4 .250 6.4 .035 .188 ±.003 .482 .52 .056 .210 .039 .020 .040 .84
5304-31 5/16 .312 7.9 .042 .250 .588 .63 .074 .272 ±.006 .046 .020 .040 1.46
5304-37 3/8 .375 9.5 .042 ±.002 .312 .680 .72 .081 .331 .046 +.006 .022 .044 1.92
5304-43 7/16 .438 11.1 .050 .375 ±.004 .752 .79 .081 .390 .056 .024 .048 2.66
5304-50 1/2 .500 12.7 .050 .406 .826 .89 .097 .440 ±.008 .056 .030 .060 3.30
5304-62 5/8 .625 15.9 .050 .500 ±.005 .966 1.03 .086 .531 .056 .047 .094 4.65
5304-75 3/4 .750 19.0 .062 .594 1.095 1.17 .095 .632 .068 .059 .118 7.48
5304-100 1 1.000 25.4 .078 ±.003 .812 ±.006 1.415 1.51 .115 .860 ±.010 .086 +.008 .070 .140 13.8
5304-125 11/4 1.250 31.8 .093 1.032 1.800 1.90 .180 1.090 .103 .080 .160 29.0
5304-150 11/2 1.500 38.1 .109 1.250 ±.008 2.050 2.18 .208 1.317 .120 .091 .182 37.1
5304-175 13/4 1.750 44.4 .125 1.406 ±.010 2.300 1.45 .235 1.480 ±.015 .139 +.010 .135 .270 58.6
5304-200 2 2.000 50.8 .125 ±.004 1.625 ±.011 2.650 1.83 .250 1.730 .139 .135 .270 59.2

 

PART NUMBER SHAFT RING GROOVE EDGE MARGIN Z min APPROX WT. LB / 1000 PCS.
DIAMETER S THICKNESS FREE DIAMETER DIAMETER WIDTH DEPTH
Frac. inch Dec. inch mm t inches Tol. inches D
inches
Tol. inches C C1 b nom G inches Tol. inches W inches Tol. inches d ref
T5304-15 5/32 .156 4.0 .025 .110 see fig.1 .39 .042 .120 ±.004 .029 .018 .036 .30
T5304-18 3/16 .188 4.8 .025 .140 .400 .42 .048 .148 ±.005 .029 .020 .040 .45
T5304-25 1/4 .250 6.4 .025 .188 ±.003 .482 .52 .056 .210 .029 .020 .040 .60
T5304-31 5/16 .312 7.9 .025 .250 .588 .63 .074 .272 ±.006 .029 .020 .040 .87
T5304-37 3/8 .375 9.5 .035 ±.002 .312 .680 .72 .081 .331 .039 +.006 .022 .044 1.60
T5304-43 7/16 .438 11.1 .035 .375 ±.004 .752 .79 .081 .390 .039 .024 .048 1.86
T5304-50 1/2 .500 12.7 .042 .406 .826 .89 .097 .440 ±.008 .046 .030 .060 2.77
T5304-62 5/8 .625 15.9 .042 .500 ±.005 .966 1.03 .086 .531 .046 .047 .094 3.91
T5304-75 3/4 .750 19.0 .050 .594 1.095 1.17 .095 .632 .056 +.008 .059 .118 6.03
T5304-100 1 1.000 25.4 .050 .812 ±.006 1.415 1.51 .115 .860 ±.010 .056 .070 .140 8.8