"Push-On" Internal Retaining Rings

tax-term-featured-image

Push On Retaining Ring Dimensions and Specifications

See our full Push On Retaining Ring Spec Sheet below.

Push-On Retaining Rings are going to be your main choice when the shaft you are working with does not have any internal grooves. The teeth or prongs each “push” against the inside of the shaft to stay in place. Not only do Push-On Retaining Rings require no groove in the shaft, they are also the ideal choice for lower force jobs.

Arcon Ring offers the best and most reliable retaining rings in the industry. We can accommodate most every size to meet your exact specifications. Other internal rings we provide include Standard Retaining Rings, Beveled Retaining Rings, Bowed Retaining Rings and Balanced Lug.

Contact Arcon Ring for selection assistance or design a custom retaining ring online!

Available Sizes: 0.311" to 2.002"

Standard Material: Carbon Spring Steel

drawing
Part
Number
RETAINING RING BORE RETAINING RING MEASUREMENTS n1
(min)
APPROX.
WT. LB /
1000 PCS.
Tc+
(lb.f)
Diameter B Inside Diameter Thickness
min.
(inch)
max.
(inch)
fraction
~
D1
inches
Tol.
inches
t
inches
Tol.
inches
1305-31 .311 .313 5/16 .136 ±.005 .010 ±.001 .040 0.11 80
1305-37 .374 .376 3/8 .175 .010 .040 0.15 75
1305-43 .437 .439 7/16 .237 .010 .040 0.20 70
1305-50 .498 .502 1/2 .258 ±.010 .010 .040 0.24 60
1305-56 .560 .564 9/16 .312 .010 .040 0.29 50
1305-62 .623 .627 5/8 .390 .010 .040 0.31 45
1305-75 .748 .752 3/4 .500 .015 ±.002 .060 0.62 75
1305-87 .873 .877 7/8 .625 .015 .060 0.75 70
1305-93 .936 .940 15/16 .687 .015 .060 0.86 70
1305-100 .998 1.002 1 .750 .015 .060 0.90 75
1305-112 1.123 1.127 1 1/8 .813 .015 .060 1.30 60
1305-125 1.248 1.252 1 1/4 .938 .015 .060 1.50 60
1305-143 1.435 1.439 1 7/16 1.125 .015 .060 1.69 60
1305-150 1.498 1.502 1 1/2 1.188 .015 .060 1.80 60
1305-175 1.748 1.752 1 3/4 1.438 .015 .060 2.09 55
1305-200 1.998 2.002 2 1.600 .015 .060 2.99 55