Rectangle Wire Snap Rings | Rectangle Wire Rings

Arcon Ring’s rectangle wire snap rings are used for a variety of heavy-duty applications because of their support and stability, providing greater shoulder strength. Much like Eaton style snap rings, they provide a greater walled-shoulder for your application. Take advantage of Arcon’s short lead times to make sure you’ll have the right amount of wire rings right when you’ll need them.

Customizable Rectangle Wire Snap Ring Solutions

Arcon Ring offers customizable gap configurations of up to 10” in diameter for our open and closed rectangle wire rings.

Arcon Ring offers customizable gap configurations for our rectangle wire snap rings. If you found the part you’re looking for and only need a slight customization to make it work, contact us, we’d love to help you get right wire snap ring to fit your application.

If you don’t see the a configuration below that meets your needs, you can custom-design your own rectangle wire snap ring right on our site.

Specifications

Catalog Stock Sizes Available: 0.188" to 1.00"

Custom Sizes Obtainable: 0.050" to 60"

Standard Material: Carbon Spring Steel

Obtainable in: Bronze, Beryllium Copper, and Stainless Steel

PART NUMBER	SHAFT		RING				GROOVE DIMENSIONS		APPROX WT. LB/ 1000 PCS.
	DIAMETER S		DIAMETER		WIDTH	THICKNESS	GROOVE DIMENSIONS
	Frac. inch	Dec. inch	Inside D	Outside O	W inches	t inches	A Width	B Depth
TRC 813	3/16	0.188	0.176	0.226	0.025	0.015	0.017	0.0070	0.07
TRC 814	7/32	0.219	0.205	0.255	0.025	0.015	0.017	0.0070	0.08
TRC 815	1/4	0.250	0.230	0.300	0.035	0.025	0.028	0.0100	0.20
TRC 816	9/32	0.281	0.261	0.331	0.035	0.025	0.028	0.0100	0.23
TRC 817	5/16	0.312	0.290	0.370	0.040	0.025	0.028	0.0110	0.29
TRC 818	11/32	0.344	0.322	0.402	0.040	0.025	0.028	0.0110	0.32
TRC 819	3/8	0.375	0.351	0.431	0.040	0.025	0.028	0.0120	0.35
TRC 820	13/32	0.406	0.382	0.472	0.045	0.025	0.028	0.0120	0.42
TRC 821	7/16	0.438	0.412	0.502	0.045	0.025	0.028	0.0130	0.45
TRC 822	15/32	0.469	0.443	0.533	0.045	0.025	0.028	0.0130	0.48
TRC 823	1/2	0.500	0.474	0.570	0.048	0.035	0.039	0.0130	0.78
TRC 824	9/16	0.562	0.534	0.630	0.048	0.035	0.039	0.0140	0.90
TRC 825	19/32	0.594	0.565	0.685	0.060	0.035	0.039	0.0145	1.20
TRC 826	5/8	0.625	0.596	0.716	0.060	0.035	0.039	0.0145	1.30
TRC 827	11/16	0.688	0.656	0.776	0.060	0.042	0.046	0.0160	1.70
TRC 828	3/4	0.750	0.715	0.855	0.070	0.042	0.046	0.0175	2.10
TRC 829	13/16	0.812	0.776	0.916	0.070	0.042	0.046	0.0180	2.20
TRC 830	7/8	0.875	0.833	0.973	0.070	0.042	0.046	0.0210	2.30
TRC 831	15/16	0.938	0.896	1.058	0.081	0.042	0.046	0.0210	2.90
TRC 832	1	1.000	0.955	1.117	0.081	0.042	0.046	0.0225	3.00

Section

On request, listed sections may be coiled to meet any shaft or housing diameter requirements. eg. (1″ shaft dia.(s) × .045 × .025 section (w-t). 4″ limit on “O” diameter

Gap

(Trc type) butted to approximately 1/2 wire section dimension.

Tolerances

Tolerances on “D” dimensions are minus as follows:

3/16″ to 3/8″ sizes: 6%
13/32″ to 1″ sizes: 5%

Tolerances on “t” (thickness) dimension are as follows:

.015 to .025 sizes: ±5%
.035 to .042 sizes: ±4%