We have the ability to manufacture compression springs, extension springs, torsion springs, double torsion springs, wire forms, fourslide wire and metal stampings.
Manufactured compression springs from round, square or rectangular material, ferrous or nonferrous, furnished with ground or unground ends. (Wire size: Min. = 0.005" Max. = 0.207") Compression springs are open-coil helical springs wound or constructed to oppose compression along the axis of wind. Helical Compression Springs are the most common metal spring configuration.
Types of ends for extension springs include machine half and full loops, full loops over center or on the side, double twisted, crossover swivel, or extended loops to specifications. (Wire size: Min. = 0.010" Max. = 0.207") Extension springs are designed to absorb and store energy as well as create a resistance to a pulling force. It is initial tension that determines how tightly together an extension spring is coiled.
Unlimited end configurations for Torsion Springs are achievable with the use of multidirectional forming slides. (Wire size: Min. = 0.008" Max. = 0.250")Torsion springs are helical springs that exert a torque or rotary force. The ends of torsion springs are attached to other components, and when those components rotate around the center of the spring, the spring tries to push them back to their original position.
Double Torsion Springs
Automatic coiling assures accuracy
and cost savings. Straight torsion
ends or ends formed to your exact
requirements.
(Wire size: Min. = 0.005"
Max. = 0.207")
Contact Us about Retaining Rings, Wire Rings, Snap Rings, and Springs.
The following links use the Adobe PDF file format. If you do not have the PDF Plug-in installed for your browser, you will need to download and install it in order to view PDF files.
Click here for printable certificate